husqvarna 261 chain saw

husqvarna 261 chain saw in america

husqvarna 261 chain saw america

husqvarna 261 chain saw america.You know who you are.
Any one with some helpful advice, it would be greatly appreciated.
Before you do anything.
On the chain bar, there is a small hole on either side, right opposite where the oil is fed from the chainsaw.
We all get dummies sometimes, by the obvious that is overlooked.
Make sure these holes are clean and the channel of the bar is clean and free of debris.
This is where the oil enters the blade to lubricate the chain.
If all is well there.
Here is what you do.
Next, you have to strip down and remove the clutch to get at the oil feed mechanism.
It comes off easily enough, but be careful not to lose any parts such as the spring, etc.
Examine the worm drive for excessive ware and the cog that drives the oil feed on the oiler itself.
If either look obviously worn, then they both will have to be replaced.
They come as a kit, so the cost s relative to what you need, but not excessive.
If all is well there, then make sure the oil orifices in the oiler itself is clear.
There is what looks like a pin inside that has a hole drilled through it.
Make sure this hole is clear and the pin can spin freely.
When everything is stripped down, wash the parts with gasoline, and then, using compressed air, blow out the lines.
There might be a screen grid to capture debris the oil tank; so you might just take a look there first.
This entry was posted on friday, february 18th, 2011 at 12:36 am and is filed under.
You can follow any responses to this entry through the feed.
Both comments and pings are currently closed.
Ï»¿ on the range exclude thither is a small hole on either side right opposite where the oil is fed from the chainsaw.
Next you have to divest downwards and transfer the clutch to get at the oil feed mechanism.
Probe the insect campaign for excessive ware and the cog that drives the oil feed on the oiler itself.
Ï»¿ next you have to divest downwards and transfer the clutch to get at the oil feed mechanism.
Probe the insect campaign for excessive ware and the cog that drives the oil feed on the oiler itself.
Ï»¿ probe the insect campaign for excessive ware and the cog that drives the oil feed on the oiler itself.. husqvarna 261 chain saw

The chainsaw guy shop t... (4:02:33)
1,538 views
""